SICK WL4-3F3130 Photoelectric Retro-Reflective Sensor Autocollimation 1028153

SICK WL4-3F3130 Photoelectric Retro-Reflective Sensor Autocollimation 1028153

$49.99
Skip to product information
SICK WL4-3F3130 Photoelectric Retro-Reflective Sensor Autocollimation 1028153
1/8

SICK WL4-3F3130 Photoelectric Retro-Reflective Sensor Autocollimation 1028153

$49.99
Only 8 available
SICK WL4-3F3130 Photoelectric Retro-Reflective Sensor Autocollimation PN 1028153



In good used condition, pulled from equipment that was in operation for less than a year before being put into storage. 



  • Device type Photoelectric sensors
    Sensor/ detection principle Photoelectric retro-reflective sensor, Dual lens
    Dimensions (W x H x D) 16 mm x 39.5 mm x 12 mm
    Housing design (light emission) Rectangular
    Sensing range max. 0.01 m ... 4.5 m 1)
    Sensing range 0.02 m ... 3.5 m 1)
    Type of light Visible red light
    Light source PinPoint LED 2)
    Light spot size (distance) Ø 75 mm (1.5 m)
    Wave length 650 nm
    Adjustment None
    • 1) Reflector PL80A.
    • 2) Average service life: 100,000 h at TU = +25 °C.
  • Mechanics/electronics
    Supply voltage 10 V DC ... 30 V DC 1)
    Ripple < 5 Vpp 2)
    Current consumption 20 mA 3)
    Switching output PNP
    Switching mode Dark switching
    Output current Imax. ≤ 100 mA
    Response time < 0.5 ms 4)
    Switching frequency 1,000 Hz 5)
    Connection type Cable with connector M8, 3-pin, 100 mm 6)
    Cable material PVC
    Conductor cross-section 0.14 mm²
    Cable diameter Ø 3.4 mm
    Circuit protection

    7)

    8)

    9)

    Protection class III
    Weight 30 g
    Polarisation filter
    Housing material Plastic, ABS
    Optics material Plastic, PMMA
    Enclosure rating

    IP67

    IP66

    Ambient operating temperature –40 °C ... +60 °C
    Ambient temperature, storage –40 °C ... +75 °C
    UL File No. NRKH.E181493 & NRKH7.E181493
    • 1) Limit values.
    • 2) May not exceed or fall below Uv tolerances.
    • 3) Without load.
    • 4) Signal transit time with resistive load.
    • 5) With light/dark ratio 1:1.
    • 6) Do not bend below 0 °C.
    • 7) A VS connections reverse-polarity protected.
    • 8) C interference suppression.
    • 9) D outputs overcurrent and short-circuit protected.




FREE SHIPPING TO THE LOWER 48 UNITED STATES, CAN SHIP WORLDWIDE IMMEDIATELY, MESSAGE US FOR AN INTERNATIONAL SHIPPING QUOTE TODAY!
We really appreciate your business!


International buyers - please note: Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.

You may also like