SIEMENS SIMATIC ET 200M 153-1AA03-0XB0 w/ 6ES7 972-0BB52-0XA0 Connection

Product type designation IM 153-1 DP ST

Vendor identification (VendorID) 801Dh

Supply voltage

Rated value (DC) 24 V

permissible range, lower limit (DC) 20.4 V

permissible range, upper limit (DC) 28.8 V

external protection for power supply lines

(recommendation)

not necessary

Mains buffering

● Mains/voltage failure stored energy time 5 ms

Input current

Current consumption, max. 350 mA; At 24 V DC

Inrush current, typ. 2.5 A

I²t 0.1 A²·s

output voltage / header

Rated value (DC) 5 V

Output current

for backplane bus (5 V DC), max. 1 A

Power loss

Power loss, typ. 3 W

Address area

Addressing volume

● Inputs 128 byte

● Outputs 128 byte

Hardware configuration

Number of modules per DP slave interface, max. 8

Interfaces

Transmission procedure RS 485

Transmission rate, max. 12 Mbit/s

1. Interface

automatic detection of transmission rate Yes

Interface types

● Output current of the interface, max. 90 mA

● Design of the connection 9-pin sub D socket

PROFIBUS DP slave

● GSD file (for DPV1) SIEM801D.GSD; SI01801D.GSG

● automatic baud rate search Yes

Protocols

Bus protocol/transmission protocol PROFIBUS DP to EN 50170

Protocols (Ethernet)

● TCP/IP No

PROFIBUS DP

● Number of node addresses, max. 1 to 125 permitted

Services

— SYNC capability Yes

— FREEZE capability Yes

— Direct data exchange (slave-to-slave

communication)

Yes; Sender

Potential separation

Potential separation exists Yes

Isolation

Isolation tested with Isolation voltage 500 V

Degree and class of protection

IP degree of protection IP20

Ambient conditions

Ambient temperature during operation

● min. 0 °C

● max. 60 °C

● horizontal installation, min. 0 °C

● horizontal installation, max. 60 °C

● vertical installation, min. 0 °C

● vertical installation, max. 40 °C

Altitude during operation relating to sea level

● Installation altitude above sea level, max. 3 000 m

configuration / header

Configuration software

● STEP 7 STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file

Dimensions

Width 40 mm

Height 125 mm

Depth 117 mm

Weights

Weight, approx. 360 g

suitability for use for connecting PROFIBUS nodes to the PROFIBUS bus cable

transfer rate

transfer rate / with PROFIBUS DP 9.6 kbit/s ... 12 Mbit/s

interfaces

number of electrical connections

● for PROFIBUS cables 2

● for network components or terminal equipment 1

type of electrical connection

● for PROFIBUS cables Integrated insulation displacement contacts for 2-wire PB FC installation

cables

● for network components or terminal equipment 9-pin sub D connector

type of electrical connection / FastConnect Yes

mechanical data

design of terminating resistor Resistor combination integrated and connectable via slide switch

material / of the enclosure plastic

locking mechanism design Screwed joint

design, dimensions and weights

type of cable outlet 90 degree cable outlet

width 15.8 mm

height 59 mm

depth 35.6 mm

net weight 45 g

ambient conditions

ambient temperature

● during operation -25 ... +60 °C

● during storage -40 ... +70 °C

● during transport -40 ... +70 °C

protection class IP IP20

product features, product functions, product components / general

product feature

● silicon-free Yes

product component

● PG connection socket Yes

● strain relief Yes

standards, specifications, approvals

certificate of suitability

● RoHS conformity Yes

We really appreciate your business!

International buyers - please note: Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.

If you are using an International freight-forwarding or mail redirection - You are not covered through the eBay money-back guarantee if your item was sent to another address after original delivery, unless you request to use the eBay Global Shipping Program or eBay International Standard Delivery. We are not responsible for any items once they have been delivered to a third-party freight-forwarder or mail redirection service.