Skip to product information
ABB Soft Starter Softstart PSE142-600-70 Motor Drive 208-600VAC 142A Modbus RTU
$599.99
ABB Soft Starter Softstart PSE142-600-70 Motor Drive 208-600VAC 142A Modbus RTU
Info from ABB:
Dimensions
- Product Net Width:
-
130 mm
- Product Net Height:
-
295 mm
- Product Net Depth / Length:
-
220 mm
- Product Net Weight:
-
4.4 kg
Technical
- Rated Operational Voltage:
- 208 ... 600 V AC
- Rated Control Supply Voltage (Us):
- 100 ... 250 V AC
- Rated Control Circuit Voltage (Uc):
- 24 V DC
- Rated Frequency (f):
- 50/60 Hz
Main Circuit 50 / 60 Hz
- Rated Operational Power - In-Line Connection (Pe):
- (230 V) 40 kW
(400 V) 75 kW
(500 V) 90 kW
- Rated Operational Current - In-Line Connection (Ie):
- 143 A
- Service Factor Percentage:
- 100 %
- Overload Protection:
- Build-in electronic overload protection
- Integrated Electronic Overload:
- Yes
- Adjustable Rated Motor Current Ie:
- 30 ... 100 %
- Starting Capacity at Maximum Rated Current Ie:
- 4xIe for 10s
- Ramp Time:
- 0 ... 30 second [unit of time]
1 ... 30 second [unit of time]
- Initial Voltage During Start:
- 30 ... 70 %
- Step Down Voltage Special Ramp:
- No %
- Current Limit Function:
- 1.5 ... 7xIe
- Switch for Inside Delta Connection:
- No
- Run Signal Relay:
- Yes
- By-pass Signal Relay:
- Yes
- Fault Signal Relay:
- Yes
- Overload Signal Relay:
- Yes
- Analog Outputs:
- 4…20 mA
- Signal Indication Completed Start Ramp (LED):
- Green
- Signal Indication Ready to Start/Standby ON (LED):
- Green
- Signal Indication Running R (LED):
- Green
- Signal Indication Ramping Up/Down (LED):
- Green
- Signal Indication Protection (LED):
- Yellow
- Signal Indication Fault (LED):
- Red
- Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time:
- 10
- Communication:
- Modbus-RTU
- Degree of Protection:
- IP00
- Terminal Type:
- Main Circuit: Bars
- Connecting Capacity Main Circuit:
- Hole Diameter 8.5 mm
Rigid 1/2 x 2.5 ... 70 mm²
Width and Thickness 17.5x5 mm
- Connecting Capacity Control Circuit:
- Rigid 1 x 2.5 mm²
Rigid 2 x 1.5 mm²
- Connecting Capacity Supply Circuit:
- Rigid 1 x 2.5 mm²
- Tightening Torque:
- Control Circuit 0.5 N·m
Main Circuit 18 N·m
Supply Circuit 0.5 N·m
- Product Main Type:
- PSE142
- Function:
- Soft start with torque control
Soft start with voltage ramp
Soft stop with torque control
Soft stop with voltage ramp
Kick start
Sequence start
Current limit
Start reverse (external contactors)
Automatic restart
Event log
- Protection Function:
- Electronic overload protection, EOL; Locked rotor protection; Current underload protection
Technical UL/CSA
- Maximum Operating Voltage UL/CSA:
- Main Circuit 600 V
- Tightening Torque UL/CSA:
- Control Circuit 4.4 in·lb
Main Circuit 159.3
Supply Circuit 4.4 in·lb
Environmental
- Ambient Air Temperature:
- Operation -25 ... +60 °C
Storage -40 ... +70 °C
- Degree of Protection:
- IP00
- RoHS Status:
- Following EU Directive 2002/95/EC August 18, 2005 and amendment
Unit is in great electrical condition, only in service for about a year before no longer being needed. Has one broken clip on the inside of the front panel right below the ethernet port (pictured) Guaranteed working.
This item is free shipping to the lower 48 States, contact us for a quote elsewhere.
Feel free to contact us with any questions
Thank you for your interest and have a great day!
International buyers - please note: Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be, prior to bidding or buying.
If you are using an International freight-forwarding or mail redirection - You are not covered through the eBay money-back guarantee if your item was sent to another address after original delivery, unless you request to use the eBay Global Shipping Program or eBay International Standard Delivery. We are not responsible for any items after they have arrived at a third-party freight-forwarder or mail redirection service.